Chlorine and ozone are the most common disinfectants used in the water and waste water industry. Oxidation- Reduction Potential is the parameter commonly used to measure the REDOX reactions and it is the only practical method we have to electronically monitor disinfectant's effectiveness.
pH is the measure of the hydrogen ion concentration in a liquid. pH measures the acidity or alkalinity of a liquid. The pH scale is logarithmic and runs from 0.0 to 14.0 with 7.0 being neutral. Readings less than 7.0 indicate acidic solutions, while higher readings indicate alkaline or base solutions. Chlorine and Ozone are the most common disinfectants used in the water and waste water treatment industry. Oxidation-reduction potential (ORP) is the parameter commonly used to measure REDOX reactions and is the only practical method we have to electronically monitor disinfectant effectiveness.
Traceability to National Standards
Push Button Front Keys for easy set up
Individual High & Low Set Point Relay for alarm or signal to PLC or can be used for proportional acid/alkali dosing
Programmable Control Delay Time to prevent chattering
Hysterisis To Prevent Relay Chattering Hysterisis is the percentage of set point below/above which relay will reset after getting energized
In-Built Diagnostics for wrong calibration or sensor error
In-Built Alarm Annunciator It''''''''s a facility to acknowledge high/low fault condition and reset relays by pressing the acknowledge key
Manual/Automatic relay reset options
Advanced Options Available:
Automatic Temperature Compensation
Dual Line Backlit Lcd which displays temperature and pH/ORP along with relay status
Rs 485 for online monitoring/ data logging
Isolated 4-20 Ma Output with normal/inverse function and in-built current simulator.
Mineral Water Plants
Liquid Waste Management
Pharma & Chemica
Pulp & Paper Industry
Yes! I am Interested
Po 600 Orp Smart Transmitter
Get Best Quote
Approx. Price: Rs 9,690 / PieceGet Latest Price
Country of Origin
Made in India
Smart Transmitter is ideal for monitoring applications, especially in hard-to-reach or cost prohibitive locations. Smart Transmitter measures pH or ORP and is compatible with most pH and ORP sensors. The transmitter has a rugged, ABS weatherproof and corrosion resistant enclosure. Smart Transmitter send process measurements from different areas in plant to central PLC/RO-Matic/Universal Indicator, Where process control decision can be made based on transmitter feedback. Smart transmitters are great cost saving alternatives to single point controllers. In situations where multiple sensing locations are required, single point controllers cost can add up quickly.