Systronics Table top Instruments

Product Details:

SYSTRONICS µC BASED CONDUCTIVITY-TDS METER 308 is a micro controller based system for accurate measurement for conductivity of liquids along with specific conductivity using temperature probe or manual temperature setting. The conductivity range is covered from 0.1uS to 100 mS in six decade range having the facility of automatic conductivity cell recognition (0.1 to 5 CC) & user's selectable temperature coefficient. Calibration data can be stored in memory and printer interface port for 80 column DM printers for hard copy of data.
Additional facility for conductivity / TDS meter 308 to measure Total Dissolved Solids (T.D.S.) from 0.1 ppm to 100 ppt by multiplying the conductivity with user-defined TDS factor.
This versatile instrument is useful where large number of samples have to be tested viz. D.M. Plants, Soil testing labs, Environmental labs, Effluent treatment plants.
The unit is housed in compact, shock/rust proof & light weight injection molded cabinet.

Product Details:

SYSTRONICS NEPHELO-TURBIDITY METER 135 is an accurate and elegant instrument designed for conducting nephelometric and turbidity measurements of suspended particles and colloids in solution. The principle of operation of this instrument is based on the well-known Tyndall effect. A beam of light passing through a turbid liquid being tested, scatters the light which, in turn, is collected at right angles by a Photodiode and indicated in a display. The amount of scattered light is proportional to the turbidity of the solution under test. The applications of turbidity measurements are vast in Municipal, Public Health, Sewage Works and in Industrial Establishments for determining quality of water/waste water.

Product Details:

SYSTRONICS NEPHELO-TURBIDITY METER 132  is an accurate and elegant instrument designed for conducting nephelometric and turbidity measurements of suspended particles and colloids in solution. The principle of operation of this instrument is based on the well-known Tyndall effect. A beam of light passing through a turbid liquid being tested, scatters the light which, in turn, is collected at right angles by a Photodiode and indicated in a display. The amount of scattered light is proportional to the turbidity of the solution under test. The applications of turbidity measurements are vast in Municipal, Public Health, Sewage Works and in Industrial Establishments for determining quality of water/waste water.

Product Details:

Systronics Digital Conductivity Meter 304 is convenient instrument for routine measurements of conductivity of various electrolytes such as Caustic content of rinse water, Electrolytic impurities in Distilled / Demineralised water, Sulphuric Acid concentration in pickling baths, Anodizing tanks, Soil Conductivity and other applications.
The instrument uses state of the art IC technology and consumes very little power. Source frequency (100 Hz or 1 KHz) gets automatically selected in the appropriate range. Type 307 also measures Total Dissolved Solid (TDS) in liquid.
The unit is housed in compact, shock/rust proof & light weight injection molded cabinet.

Product Details:

Systronics Digital Conductivity Meter 307 is convenient instrument for routine measurements of conductivity of various electrolytes such as Caustic content of rinse water, Electrolytic impurities in Distilled / Demineralised water, Sulphuric Acid concentration in pickling baths, Anodizing tanks, Soil Conductivity and other applications.
The instrument uses state of the art IC technology and consumes very little power. Source frequency (100 Hz or 1 KHz) gets automatically selected in the appropriate range. Type 307 also measures Total Dissolved Solid (TDS) in liquid.
The unit is housed in compact, shock/rust proof & light weight injection molded cabinet.

Product Details:

SYSTRONICS µC BASED CONDUCTIVITY 306 is a micro controller based system for accurate measurement for conductivity of liquids along with specific conductivity using temperature probe or manual temperature setting. The conductivity range is covered from 0.1uS to 100 mS in six decade range having the facility of automatic conductivity cell recognition (0.1 to 5 CC) & user's selectable temperature coefficient. Calibration data can be stored in memory and printer interface port for 80 column DM printers for hard copy of data.
Additional facility for conductivity / TDS meter 308 to measure Total Dissolved Solids (T.D.S.) from 0.1 ppm to 100 ppt by multiplying the conductivity with user-defined TDS factor.
This versatile instrument is useful where large number of samples have to be tested viz. D.M. Plants, Soil testing labs, Environmental labs, Effluent treatment plants.
The unit is housed in compact, shock/rust proof & light weight injection molded cabinet.

Product Details:

SYSTRONICS DIGITAL pH METER 335 is a high quality precision instruments designed specially to take care of accurate pH measurements in chemical research laboratories. Minimum control on the front panel and the easy of operation make it handy even for routine analysis. Precision is ensured using very low temperature co-efficient components, latest IC regulators, very high input impedance op-amps and LSI circuits. In model 802 can be used for polarizing current is provided to facilitate Karl-Fischer titration, recorder output enables recording of pH/mV measurements on a Strip Chart Recorder, for a continuous monitoring of a permanent record of the results.
The unit is housed in a compact, shock/rust proof & light weight injection molded cabinet.

Product Details:

SYSTRONICS DIGITAL pH METER 802 is a high quality precision instruments designed specially to take care of accurate pH measurements in chemical research laboratories. Minimum control on the front panel and the easy of operation make it handy even for routine analysis. Precision is ensured using very low temperature co-efficient components, latest IC regulators, very high input impedance op-amps and LSI circuits. In model 802 can be used for polarizing current is provided to facilitate Karl-Fischer titration, recorder output enables recording of pH/mV measurements on a Strip Chart Recorder, for a continuous monitoring of a permanent record of the results.
The unit is housed in a compact, shock/rust proof & light weight injection molded cabinet.

Product Details:

SYSTRONICS PH System 361 is an intelligent high resolution and precise instrument. It measures pH of a solution, using a pH electrode. The unit can also measure millivolt (mV) generated by the sensing electrode. It is named as mV-Absolute when the unit is asked to work like a conventional voltmeter and as mV-Relative when the voltage is measured with reference to a 7 pH solution. Facility to measure temperature using a Pt 100 sensor is also provided
The unit is housed in a compact, shock/rust proof & light weight injection molded cabinet.

Product Details:

The advantages of the Water Analyzer 371:

 

• Micro controller Based
• Measures pH
• Measures mV / ORP
• Measures Conductivity / TDS
• Measures Salinity
• Measures Dissolved Oxygen
• Measures Temperature
• Measures Colorimeter
• Measures Turbidity

Product Details:

The advantages of the pH/EC/TDS/Salinity Meter (PETS) 372:

 

• Measurement of pH, mV, EC (Electrolyte Conductivity), TDS and Salinity are possible
• pH, EC , TDS or Salinity (Any of one at a time) parameters displayed along with temperature of sample
• 240 * 128 Monochrome LCD Display
• Back up for calibration data
• 500 Measured readings data stored for all four parameters along with temperature
• Recall saved data for view, print etc.
• In pH mode: 2, 3, 4 & 5 point calibration option, with user & STD buffer selection
• Measurement Display with BIG FONT
• Hold function
• Temperature compensation Auto / Manual

Product Details:

SYSTRONICS PH System 362 is an intelligent high resolution and precise instrument. It measures pH of a solution, using a pH electrode. The unit can also measure millivolt (mV) generated by the sensing electrode. It is named as mV-Absolute when the unit is asked to work like a conventional voltmeter and as mV-Relative when the voltage is measured with reference to a 7 pH solution. Facility to measure temperature using a Pt 100 sensor is also provided
The unit is housed in a compact, shock/rust proof & light weight injection molded cabinet.