Our digital flow meter necessarily has a flow sensor with a magnetic multi-bladed spinning rotor (impeller) mounted inside at right angles to the flow. The rotational speed of the impeller is proportional to the velocity of fluid. The pulse generated is transmitted and converted into a volumetric measurement. Our digital flow meters are individually calibrated to give reliable flow measurement.
Digital flow meter measuring flow rate from 0.05m
/hr to 500m/hr
Remote Reset (Auto/Manual)
Optional computer interface with RS 485 or 4-20mA output
Dual Sensor, dual line, single meter.
Batcher and Totaliser: Relay gets energized after a fixed quantity of water passes through the sensor. The batcher has an auto reset, manual reset and dual relay operation facility. Batch quantity counts downwards till zero value.
Flow Comparator: The meter is supplied with two sensors for RO permeate and inlet/ reject line. The meter displays both the flow rates and also calculates percentage recovery.
The setting is done on Percentage Recovery If plant recovery is increased by the client to get more permeate, plant will trip thereby safeguarding expensive membranes.
Rate Switch Mode: The relay is programmed to energize whenever actual Flow falls below the set value. Display shows Low Flow Rate
Pulser: Meter can be configured to suit any metering/dosing pump Chemical dosing can be done online proportional to flow.
Opetional Data Logger: The flow meter is available with data logger option where flow rate & total flow with date & time is stored in a 2GB Memory card