Transformium Engineers
odhav, Ahmedabad, Gujarat
GST No. 24BBIPP3303F1Z1
TrustSEAL Verified
Call 08048109057
88% Response Rate
SEND EMAIL
Product Details:
| Minimum Order Quantity | 1 Piece |
| Measuring Range | 0-9999 (other ranges optional) |
| Country of Origin | Made in India |
| Brand | Aster |
| Accuracy | +/- 2% FSD |
| Resolution | 0.001/0.01/0.1/1 depending upon range |
| Model No | CI 550 |
| Physical Dimensions | 105 x 105 x 130 mm |
| Cut out size | 90 x 90 mm |
| Enclosure | ABS weather proof IP-65 |
| Mounting | Field / Pipe / Panel |
| Input Supply | 230 V A.C./ 110 V A.C./24V D.C. |
| Display | 4 digit LED display |
| Calibration | Using front keys |
| Output | 4-20 mA |
Why choose us:
Advanced options available:
Product Details:
| Minimum Order Quantity | 5 Piece |
| Brand | Aster |
| Accuracy | +- 2% |
| Resolution | 0.01/0.1/1 depending on range |
| Model No | CI/TI 350 |
| Physical Dimensions | 75 x 75 x 90 mm |
| Cut out Size | 68 x 68 mm |
| Enclosure | ABS weather proof |
| Mounting | Panel |
| Input Supply | 230 V A.C |
| Display | 4 digit LED display |
| Calibration | Using trim pots |
| Temperature | 0-60 deg C |
| Country of Origin | Made in India |
Product Details:
| Country of Origin | Made in India |
| Model Name/Number | ION-511-M |
| Brand | Dic |
| Usage/Application | Industrial |
| Measure Range | 0-20.00 Or 200.0 Or 2000uS/cms Or 0-20.00 Or 200.0mS/cms |
| Accuracy | +/- 1 digit Of F.S |
| Warranty | 1 Year |
| Resolution | 0.01 or 0.1 Or 1digit |
| Model ION-511-M | Specification |
|---|---|
| Single Range | 0-20.00 Or 200.0 Or 2000uS/cms Or 0-20.00 Or 200.0mS/cms |
| Resolution | 0.01 or 0.1 Or 1digit |
| Accuracy | +/- 1 digit Of F.S |
| Dual Display | Upper For Cond. (Red LED) & Lower for Control Setting (Red LED) |
| Calibration | Single point manual Calibration ( KCL Based ) |
| Calibration Slop | +/- 30% Of Display Reading |
| Cell Constant | 1.0 Cell constant +/- 10% with 1/2” BSP threading |
| Current O/P | 4-20mA D.C, fully isolated ( Optional At Extra Cost ) |
| Relay O/P | One Changeover Relay potential free Contact of 5 Amp |
| Control Setting | Two Set Point with High & Low Value Setting |
| Power Requirement | 230V A.C +/-10%, 50Hz single phase |
| Environment | 5 to 50c. |
| Dimension & Weight | 96 x 96 x 65mm ( Grey ABS Cabinet ), 400grams for Inst. Only (Approx) |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Country of Origin | Made in India |
| Model Name/Number | 512-GLC |
| Brand | dic |
| Conductivity | 20.00 microS/cm to 200.0 milliS/cm |
| Usage/Application | Industrial |
| Display Type | 64 x 128 Graphic LCD Display With Back Light |
| I Deal In | New Only |
| Accuracy | Better then +/- 1% of F.S |
| Temperature Accuracy | +/- 0.5 c |
| Temperature Resolution | 0.1 c |
| Conductivity | TDS | Resolution | |
|---|---|---|---|
| 20.00μS/cm, | 20.00 ppm, | 0.01 | |
| 200.0μS/cm, | 200.0 ppm, | 0.1 | |
| 2000μS/cm, | 2000 ppm, | 1 | |
| 20.00mS/cm, | 20.00 ppt, | 0.01 | |
| 200.0mS/cm. | 200.0 ppt. | 0.1 | |
| Display | 64 x 128 Graphic LCD Display With Back Light | ||
| Accuracy | Better then +/- 1% of F.S | ||
| Temperature Range | 0.0 to 200.0 c | ||
| Temperature Resolution | 0.1 c | ||
| Temperature Accuracy | +/- 0.5 c | ||
| Temperature Compensation | Automatic | ||
| Temperature Coefficient | 0.1 to 10.0 % | ||
| Normalisation Temperature | 25.0 c | ||
| Temperature Sensor I/P | Pt-100 RTD | ||
| Cell Constant, K | K = 0.01, 0.1, 0.5, 1.0, & 10 ( User Selectable ) * | ||
| TDS Factor | 0.40 to 1.00 | ||
| Calibration | Manual Single Point Calibration | ||
| Calibration Range | +/- 30 % of the Display Reading. | ||
| Control Relay O/P | Two 5 Amp. 24V Contacts Free Relay | ||
| Control Set Point Logic | [Two Set Point With 1 Relay] [Two Set Point With 2 Relay] [ Four Set Point With 2 Relay ] | ||
| Current O/P [ Optional ] | 4-20mA D.C Fully Isolated O/P ( For Conductivity Or TDS Only ) | ||
| Modbus O/P [ Optional ] | 485 Modbus RTU | ||
| Operating Environment | 0 to 50 C | ||
| Supply | 230 V A.C , +/- 10 V, 50 Hzs | ||
| Instruments Size & Type | 96 x 96 x 70 mm , Panel Mount Type (Grey High Quality ABS Plastic Housing) | ||
Product Details:
| Country of Origin | Made in India |
| Model Name/Number | D 509/511 |
| Brand | dic |
| Usage/Application | Laboratory |
| Display Type | 3.5 digit,Red LED display with auto decimal selection |
| Accuracy | +/- 2% Of F.S,+/- 1 digit @ 25 c |
| Model D-509 / 511 | Specification |
|---|---|
| Four Range | Selectable ranges For TDS :- 20ppm, 200ppm, 2000ppm, 200ppt & conductivity:- 20S/cms, 200S/cms, 2000S/cms, 200m/cms |
| Resolution | 0.01, 0.1, 1, 0.1 |
| Accuracy | +/- 2% Of F.S, +/- 1 digit @ 25 c |
| Frequency | 1kHz in built |
| Display | 3.5 digit, Red LED display with auto decimal selection |
| Calibration | Single point manually |
| Cell | 1.0 Cell constant +/- 10% (Platinum Cell) |
| Power Requirement | 230V A.C +/-10%, 50Hz single phase |
| Environment | 5 to 50c |
| Dimensions | 205x65x130mm ( Alluminium powder coated cabinet ) |
| Weight | 1.5kgs (Approx) including accessories |
| Standard Accessories | Cell, Stand, Rod, Clamp, Dust Cover & Operation Manual |
Product Details:
| Brand | Aster |
| Accuracy | +/- 2% FSD |
| Output | 4-20 mA / RS 485 |
| Country of Origin | Made in India |
| Model No | CT 650 |
| Physical dimensions | 105 x 105 x 130 mm |
| Cut out size | 90 x 90 mm |
| Enclosure | ABS weather proof IP-65 |
| Mounting | Field / Pipe / Panel |
| Input supply | 230 V A.C./ 110 V A.C./ 24 V D.C |
| Alarms | In built buzzer with blinking LED for high conductivity indication |
| Control operation | Alarm/auto reset |
| Resolution | 0.001/0.01/0.1/1 depending upon range |
| Display | 4 digit LED display/ 16 X 2 alpha numeric Backlight LCD(optional) |
| Measuring Range | 0-9999 (other ranges optional) |
Product Details:
| Minimum Order Quantity | 1 Piece |
| Country of Origin | Made in India |
| Usage/Application | Industrial |
| Brand | Dic |
| Accuracy | +/- 1% Of F.S |
| Display Configuration | 4 Digit Single Red LED Display |
| Display Resolution | 0.01,0.1,1 for both Conductivity & TDS |
| Model 510-CT | Specification |
|---|---|
| Range ( Auto Ranging) | Conductivity :- 0-20.00μS/cm, 200.0μS/cm, 2000μS/cm TDS :- 0-10.00ppm, 100.0ppm, 2000ppm ( With 0.49 Factor) |
| Resolution | 0.01, 0.1, 1 for both Conductivity & TDS |
| Accuracy | +/- 1% Of F.S |
| Display | 4 Digit Single Red LED Display |
| Calibration | Single point manual Calibration |
| Calibration Slop | +/- 30% Of Display Reading |
| Cell ( Sensor ) | 1.0 Cell constant +/- 10% with 1/2” BSP threading & with 4mts Cable |
| TDS Factor | Factory Def. 0.49 |
| Relay O/P (Optional) | One 2 Amp Relay O/P With Hystreasis & Decimal Setting |
| Power Requirement | 230V A.C +/-10%, 50Hz single phase |
| Environment | 5 to 50c. |
| Dimension & Weight | 96 x 96 x 65mm ( Grey ABS Cabinet ), 400grams for Inst. Only (Approx) |
